Відео

Very Helpful Thanks.

Damn good video.

Good video thanks

or you can unscrew the oil filter and plug it in in 5 minutes from the wheel well

Great video man! I was always afraid doing this on my 2013 Cummins, but after seeing this video I want for it. Got it done last weekend and and it took me just under 9 hours. I drop down the headliner Saturday and finished it up on Sunday. I was taking my time and measuring 100 times!

I'm thinking of going with an aftermarket cable that does come with a really nice socket that screws to the bumper

Great video, thanks!

Glad this video is here. I found my heater cord (it was already installed with the winterization pack from the factory, as I thought), but I couldn’t find the cord on my 2021 Ram 2500. I also had the 2015 Ram 3500 and they were not installed in the same location. Both trucks had the winterization package already on them from factory. Thanks for this video. It was very helpful and using factory equipment is always a great idea, I agree. A little more expensive now can save lots of money later (aka don’t buy the after market and not OEM to save a couple bucks). The factory one will usually save you quit a bit of time anyway. You mentioned the OEM had the clips already installed. Again, great video.

Good video thanks

Thanks Alots sir !! That's the one i've been looking for Since Years 🇷🇼🇷🇼🇷🇼🇷🇼🇷🇼🇷🇼👍👍👍

Hey Just came across your video. Yes drilling holes in a new truck roof top is scary to say the least. Especially a Laramie model. How’s it holding up. Excellent video tutorial

Killer video.

Just wanted to say great video, but I have a question the same process that you are doing I would like to do it with one external SSD and would love to combine it with my internal 1TB Sam son Drive running Mojave 10.14.6 is that possible please if anyone knows I would love to know thank you

A $95 option if you order the truck. But I bought off the lot. Have to decide how bad I want these (spoiler: I want them)

Do you think I can add a fuse at the end of the power wire just in case a led bulb goes out and I don’t fry the wiring harness?

Do you still recommend? Have you had any problems with leaking?

This video helped me out quite a bit. Your effort in ensuring we are able to see exactly what your showing, referring to is extremely helpful. You surely saved me cost as I now have this part on order for my 3500 H/O. Thanks

Your truck didn't come with clearance lights because it's not big enough.

successfully installed mine yesterday thanks to your video - IBEW 1249 💪🏼

If you're going to replace the cord why don't you just cut the cord make it a lot easier

Worked perfect!! Thanks for making it clear and easy!

Is it only for diesel trucks? My 6.4l has it too.

Haha. Hey let’s drill the holes in the roof, then test for power.

Thank you ❤️

Most detailed how to for this installation!!! Awesome content.

does this work on big sur also just the normal disks on the mac like macintosh?

It's much easier to just do it when you change your oil. Once the oil filter is off, the plug is right there. Helps if you are rotating tires too. Leave wheel off, pull oil filter, plug in cord, done. No need to take apart the air box and cold air return tube.

The best and most explanatory video, no matter how long it lasted, what matters that it makes it very clear how it should be done

Awesome

When I ordered my 11 3500 I told the dealer I wanted this but the sales guy exact words were.... you don’t need one it don’t get cold in Pennsylvania lol.

I plugged in my 6.7 dodge but nothing happens, motor is always cold plugged in

What happens if one of the disks fail? Can you remove the failed disk and add a new disk and carry on using the raid disk as usual?

Excellent, Excellent Video! Gives me the confidence that I can do it myself. One of the better "How to" videos on UA-cam

All cummins engines come with a block heater installed. Since the first gen 5.9L. Side note: all block heater cords are safe, may or may not last as long as oem but they are safe. I buy the $10 cords and they work just fine. My oem cord only lasted 6 months. Dielectric grease is important. It will save you lots of cords and getting a light shock when your truck is plugged in.

Wich one its positive and wich one negative ?

Where did you get the template?

Great Video.. Easy to Follow.. Maybe I'll try to do mine.

What substance did you use to prevent rust from occurring on the holes?

Very good video sir appreciate the the effort. And nice wrenchworkz hat

IMPORTANT : After locating the disk (for example : disk3) with {diskutil list} the correct command is {diskutil eraseDisk JHFS+ UntitledUFS disk3}.

Thanks for the video. It made my install straight foreword.

Thanks man just did mines today, your video helped me alot

Awesome video. By far the best one out there for explaining where all the push pins go and frame clips. Thank you.

caboveramerica.com a U.S. patented stylish, high quality, exciting, revolutionary new alternative for LED-COB cab clearance marker lights. For all Trucks and SUV,s. These wireless cab clearance marker lights require no holes in your cab. Easy installation Cab Over America™.

If my mac has a Hdd and I replaced my optical drive with a SSD drive and combine them together my laptop would be faster? Or the main hard drive Has to be the SSD to notice change? Best regards

So if my window sticker says it has the heavy duty snow plow prep group, then I should have a plug already on there? or would I still have to buy a wire plug? Thanks

Thank you for such a detailed video! Just had my Mopar OEM lights come in the mail today. I have an 11 Laramie Longhorn, basically the same install wise, but will wind up having to bring them back towards my sun roof about an inch due to another roof support behind that shelf from the peek I took in the headliner tonight. Biggest plus side is being able to hang out of the roof to drill those holes though. Haha

once the raid drives are split into 2 drives, how do you make it into just a single 8tb drive again? I cant find this information anywhere. I appreciate some help with this. Thanks

Much easier if you don't mess with the headliner console. Just remove both pillars and visors and the head liner front will drop down enough to feed the wires up to the holes. Really funny is that MOPAR says this takes an hour. Uh... nope.

Thanks for the video, been trying after I put in two new ones in, the others wend bad, glad I backed up the info on them before they went. This is awesome! Now I have one drive! Thanks!